Blog

When to Plant Belgian Endive in Morgan County, UT

Morgan County, Utah Zone 6a May

This month in Morgan County, Utah

We've pulled the most time-sensitive tasks for Morgan County, Utah this May and put them front and centre. Tackle them in order.

Avg. last frost June 17
Avg. first frost August 31
Soil temp (4") 40°F
Watering High
Pest pressure Low
Daylight 14.3 hrs
A few tasks this May that'll pay off in June
  • Transplants going out: belgian endive
  • Direct-sowing: belgian endive
  • Fall sowing: belgian endive

Instant PDF download. No spam, unsubscribe any time.

Belgian endive is produced by forcing chicory roots in darkness to create tight, pale, torpedo-shaped heads called chicons. They have a mild bitterness and elegant crunch.

Morgan County, Utah is in USDA Zone 6a. The average last spring frost is June 17 and the first fall frost is August 31, giving you a growing season of approximately 75 days.

At an elevation of 6,439 feet, Morgan County receives approximately 14.4 inches of rainfall annually with predominantly loam soil. Summer highs average 84°F, so choose short-season varieties of Belgian Endive to ensure they mature before fall. With low rainfall, drip irrigation is essential for growing Belgian Endive successfully. Mulch heavily to conserve soil moisture.

Morgan County, UT (Zone 6a) Very short season
75 days
Last Spring Frost June 17
75 growing days
First Fall Frost August 31

Morgan County Soil Profile

Soil Type

Loam

Soil pH

6.5-8.1

Drainage

Well Drained

Plant Planting Risk Windows

Early Start (70% safe) ✗ May not fit
Start indoors: May 6 Transplant: Jun 10 🍅 Harvest: Sep 30 – Nov 25
Recommended (50%) ✗ May not fit
Start indoors: May 13 Transplant: Jun 17 🍅 Harvest: Oct 7 – Dec 2
Safe Start (90%) ✗ May not fit
Start indoors: May 20 Transplant: Jun 24 🍅 Harvest: Oct 14 – Dec 9

Percentages indicate frost risk at transplant. The 70% safe window means there is a 30% chance of frost after transplant — suitable for cold-hardy crops or gardeners with frost protection. The 90% safe window is best for tender plants.

Soil Compatibility in Morgan County

How your county's soil matches Belgian Endive's growing requirements.

Soil pH

Your soil pH (6.5–8.1) is more alkaline than Belgian Endive prefers (5.5–7.0). Add sulfur or peat moss to lower pH.

Soil Texture

The loam soil in Morgan County is excellent for Belgian Endive — good drainage, moisture retention, and nutrient holding capacity.

Drainage

Drainage is adequate for Belgian Endive.

Organic Matter

Organic matter is moderate (2.5%). Annual compost additions will help Belgian Endive.

How to Plant Belgian Endive

0.5"
Planting Depth
6"
Between Plants
12"
Between Rows

Fall planting: Sow 10 weeks before your first frost date for a fall harvest.

Plant Water Budget

Plant needs
1.0″/week
Rainfall provides
0.8″/week
You supply
0.6″/week
Watering frequency 1-2 times/week
Season total 395 gal / 100 sq ft
Drought risk

Water stress score is 8/10 — consider drought-tolerant varieties and mulching

Monthly Watering Guide for Belgian Endive

Belgian Endive needs approximately 1 inches of water per week (4.3" per month). Here's how your county's rainfall compares month by month.

Month Belgian Endive Needs Rainfall You Supplement Action
Jan 1.1" 0" ❄️ Dormant
Feb 0.8" 0" ❄️ Dormant
Mar 1.2" 0" ❄️ Dormant
Apr 1.4" 0" ❄️ Dormant
May 1.8" 0" ❄️ Dormant
Jun 4.3" 0.9" 3.4" 🚿 Regular watering
Jul 4.3" 1.5" 2.8" 🚿 Regular watering
Aug 4.3" 1.4" 2.9" 🚿 Regular watering
Sep 1.2" 0" ❄️ Dormant
Oct 1.1" 0" ❄️ Dormant
Nov 1" 0" ❄️ Dormant
Dec 0.8" 0" ❄️ Dormant

Water needs are for active growing months only (Jun–Aug in Morgan County). Supplement amounts are based on average rainfall — actual needs vary with temperature, soil, and mulching.

Belgian Endive Heat Requirements (GDD)

What are Growing Degree Days (GDD)?

Growing Degree Days measure the total warmth your plants receive during the growing season. Think of it as a "heat bank" — every day above 50°F deposits warmth that helps your plants grow.

Each plant needs a certain amount of accumulated heat to mature. If your county provides more GDD than the plant needs, it's a great fit. If it's close, you may want to choose faster-maturing varieties or start seeds indoors to get a head start.

Belgian Endive needs ~1,690 GDD — county provides 975 GDD May not mature

Belgian Endive Planting Timeline — Morgan County, UT

Belgian Endive Planting Calendar

Activity When Date Range
Start Indoors May 13 May 13 – May 27
Transplant Outdoors June 17 Jun 17 – Jul 1
Direct Sow June 3 Jun 3 – Jun 24
Harvest October 7 Oct 7 – Dec 2
Fall Sowing June 22 Jun 22 – Jul 6

Plant 0.5" deep · 6" apart · Rows 12" apart

Month-by-Month Timeline

MonthActivities
January
February
March
April
May Start Indoors
June Transplant Outdoors Direct Sow Fall Sowing
July Transplant Outdoors Fall Sowing
August
September
October Harvest
November Harvest
December Harvest

Growing Conditions

☀️ Sun

Partial Shade (3-6 hours)

💧 Water

1"/week · 1-2 times/week

📅 Days to Maturity

110–150 days

🧪 Soil pH

Needs 5.5–7 · Your soil: too_alkaline

🗺️ USDA Zone

Zone 6a

📆 Growing Season

75 days in Morgan County

Growing Tips for Belgian Endive in Morgan County

Direct sow Belgian Endive outdoors after June 17 in Morgan County when soil has warmed and frost danger has passed.

Your 75.0-day growing season in Morgan County is tight for Belgian Endive (110.0-150.0 days to maturity). Start indoors and choose early-maturing varieties.

Common pests for Belgian Endive in this region include aphids and slugs. Use row covers early in the season and inspect plants weekly.

Morgan County receives only 14" of rain annually. Belgian Endive needs consistent moisture — install drip irrigation or water deeply 2-3 times per week.

General growing tips

Grow chicory roots in the garden during summer, then dig in fall. Trim tops and force roots in moist sand in a dark cellar at 50-60F. Chicons emerge in 3-4 weeks.

Companion Planting

Good Companions

Avoid Planting Near

  • Fennel

Check more plant combinations with our Companion Planting Checker →

Frequently Asked Questions

When should I plant Belgian Endive in Morgan County, UT?

Morgan County is in Zone 6a with an average last frost of June 17. Plan your Belgian Endive planting based on this frost date — see the calendar above for exact timing.

What planting zone is Morgan County, UT?

Morgan County, Utah is in USDA Hardiness Zone 6a. The average last spring frost is June 17 and first fall frost is August 31.

🌱

Your Morgan County Garden Planner — Free

A 24-page printable planner built for Morgan County (Zone 6a). Planting dates, a month-by-month schedule, harvest log, seed inventory, and succession charts — all dialed in for your exact growing season.

Instant PDF download. No spam, unsubscribe any time.

Data sources: USDA Plant Hardiness Zone Map (2023), NOAA 30-Year Climate Normals. Frost dates are based on 50% probability averages for Morgan County, UT. Local conditions may vary. Last updated: May 2026.

Sources & credits

Every number on this page traces back to a primary horticulture or government data source. Click through to verify.